All of our products are manufactured for reliability and consistently high quality and are RoHS compliant as standard.
Our bright zinc based platings are all high quality trivalent clear chromate based finishes.
Mild Steel (En1a)
303 Stainless Steel
304 Stainless Steel
316 Stainless Steel
Aluminium
Brass
Other speciallity materials available - call with your requirments.
Unplated
Zinc / Cr3 Clear Chromate
Other platings and surface treatments available - call with your requirments
Click here for a detailed explanation of our available platings
Round Standoff Serrated Shoulder
Mini Standoff Serrated Shoulder
Round Bush for Clinch Nut Hole Sizes
Fastener & Application Testing
Design & Development of bespoke Fasteners
Rivet Bushes provide strong reusable threads in panels too thin to be conventionally tapped.
They can be installed into panels as thin as 0.5mm and do not suffer from the maximum hardness limitations of Self Clinching Nuts and Standoffs so are suitable for installation into Stainless Steel panels.
Ideally Rivet Bushes should be installed using a press with a suitability profiled punch however they can be installed using a hammer and ball bearing.
We can supply Rivet Bushes to suit a range of panel thicknesses and can supply parts to non-standard dimensions and hole sizes to suit your specific application.
Available in Metric sizes in Steel unplated, Steel Bright Zinc Plated and Stainless steel as standard. We are also able to supply UNC/UNF, BA, BSW, BSP sizes to special order.
304 and 316 stainless steels, brass & aluminium parts available to order.
