NP
Contact us You can contact us using any of the methods below. Unit 3 Durham Lane Armthorpe Doncaster South Yorkshire DN3 3FE England +44 (0)1302 836010 +44 (0)1302 831555 sales@npfasteners.com
All rights reserved © Northern Precision Ltd.
NORTHERN PRECISION LTD
Accreditations Northern Precision Ltd operate a quality management system in accordance with ISO 9001. The ISO 9001 standard is recognised worldwide and you can be assured of the benefits of working with a certified company knowing that our management systems are constantly assessed and improved.
Registered in England & Wales Company number 3275391
V.A.T Registration number GB 684 1384 17
NP
NORTHERN PRECISION LTD
Specialist Fasteners for Sheet Metal
+44 (0) 1302 836010
+44 (0) 1302 831555
Tel:
Fax:
sales@npfasteners.com
Quality
Service
Reliability
Northern Precision Ltd YouTube Channel
Material & Finish
Electro Nickel plated Carbon Steel (CN) parts are suitable for installation in ductile panels with a maximum recommended hardness of 80 HRB.
Part Number Examples
Part number is made up as follows: (Type)-(Plunger code)-(Material/Finish Code) For example: NTL2-04-4-CN (Locking Plunger Assembly-1.53mm minimum sheet thickness-electro nickel plated steel) NSL2-04-4-CN (Non-Locking Plunger Assembly-1.53mm minimum sheet thickness-electro nickel plated steel)
RoHS REACH COMPLIANT
Info
Self-Clinching Plunger Assemblies provide a captivated spring loaded positioning pin for use in thin sheet metal components such as draw slides and consoles. When fully retracted the plunger pin sits below the underside of the panel and features a twist to lockout design (type NTL2), so the plunger pin can be locked in a fully retracted position. It can also be supplied without the lockout feature (type NSL2). Utilising a special proven clinch feature, this fastener has excellent pull-out and push-out characteristics whilst providing a flush finish on the underside of the panel. Like all self clinching fasteners they are installed using a parallel squeezing action, so require access to both sides of the panel.   Self-Clinching Plunger Assemblies are manufactured from electro nickel plated carbon steel and are suitable for installation in ductile panels with a recommended maximum hardness of 80 HRB.
Dimensional
Type
Min CL to edge of panel
NTL2
8.31
12.70
8.33
7.87
10.30
8.34
1.47
04-4
6.35
4.32
15.11
22.73
1.53
NSL2
8.31
12.70
8.33
7.87
10.30
8.34
1.47
04-4
6.35
4.32
12.95
19.81
1.53
Plunger code
Hole size +0.08 -0.0
C Max.
A -0.13
L1 ±0.25
E ±0.25
L2 Max.
Min. sheet thickness
S Max.
H ±0.25
B ±0.25
D ±0.25
Self Clinching Plunger Assembly
Type NTL2|NSL2
SELF-CLINCHING PLUNGER ASSEMBLY
self-clinching plunger assembly