| Thread | Fastener Material |
Max Nut Tightening Torque (Nm) |
Test Panel |
Panel Hardness (HRB) |
Installation (kN) |
Pushout (N) |
Torque Out |
Tensile Strength (kN) |
| M5 | Steel | 4.4 | 1.5mm Aluminium | 15 | 13 | 800 | 5.4 | 12.8 |
| Steel | 4.4 | 1.5mm Steel | 65 | 26 | 1500 | 7.6 | 12.8 | |
| Stainless | 4.4 | 1.6mm Aluminium |
35 | 12.4 | 800 | 5.4 | 7.3 | |
| Stainless | 4.4 | 1.5mm Steel | 54 | 21.7 | 1500 | 6.4 | 7.3 | |
| Phosphor Bronze |
3.47 | 1.5mm
Copper CDA-110 |
28 | 15.6 | 1115 | 3.4 | 5.9 | |
| M6 | Steel | 10 | 1.5mm Aluminium | 43 | 29 | 1270 | 14 | 18.1 |
| Steel | 10 | 1.5mm Steel | 59 | 33 | 1750 | 14 | 18.1 | |
| Stainless | 10 | 1.6mm Aluminium |
35 | 15.4 | 1270 | 11 | 10.3 | |
| Stainless | 10 | 1.6mm Steel | 45 | 24.6 | 1750 | 11 | 10.3 | |
| Phosphor Bronze |
5.9 | 1.5mm
Copper CDA-110 |
28 | 25.3 | 1600 | 6.7 | 8.3 | |
| M8 | Steel | 21.7 | 2.3mm Aluminium | 39 | 35.6 | 1700 | 30 | 32.9 |
| Steel | 21.7 | 2.3mm Steel | 58 | 44.5 | 2200 | 30 | 32.9 | |
| Stainless | 21.7 | 2.3mm Aluminium |
44 | 24.4 | 1700 | 20 | 18.8 | |
| Stainless | 21.7 | 2.5mm Steel | 43 | 37.8 | 2100 | 20 | 18.8 | |
| Phosphor Bronze |
1.3 | 3.2mm
Copper CDA-110 |
32 | 33 | 2250 | 15.3 | 15.1 | |
| M10 | Steel | 36.6 | 2.3mm Aluminium | 39 | 40 | 2445 | 36 | 52.2 |
| Steel | 36.6 | 2.3mm Steel | 58 | 54 | 3470 | 49 | 52.2 | |
| Stainless | 36.6 | 2.3mm Aluminium |
44 | 33.3 | 2445 | 36 | 29.9 | |
| Stainless | 36.6 | 2.5mm Steel | 44 | 46.7 | 3470 | 36 | 29.9 | |
| Phosphor Bronze |
28.5 | 3.2mm
Copper CDA-110 |
32 | 42 | 2500 | 25 | 24 |
The above data is based on average values obtained in a test environment. Variations in hole size, panel material and installation will effect performance. It is recommended that you carry out your own performance tests in the actual application. Contact our sales department who will be happy to supply samples free of charge.
