| Thread Size | Test Panel |
Panel Hardness (HRB) |
Installation (kN) |
Max Nut Tightening Torque (Nm) |
Torque Out (Nm) |
Pushout (N) |
Pull Through (N) |
Pull Through Test Bushing Hole Size |
M2.5 |
1.1mm Steel | 53 | 5.2 | 0.41 | 1.12 | 454 | 2247 | 3.0mm |
| 1.2mm Aluminium | 33 | 3.0 | 0.41 | 0.53 | 289 | 1193 | ||
| M3 | 1.1mm Steel | 53 | 5.3 | 0.74 | 1.31 | 471 | 2491 | 3.5mm |
| 1.2mm Aluminium | 33 | 4.4 | 0.46 | 0.62 | 288 | 1307 | ||
| M3.5 | 1.1mm Steel | 53 | 6.5 | 1.15 | 1.76 | 498 | 2789 | 4.0mm |
| 1.2mm Aluminium | 33 | 4.5 | 0.58 | 0.80 | 292 | 1396 | ||
| M4 | 1.1mm Steel | 53 | 6.7 | 1.70 | 2.08 | 551 | 3312 | 4.5mm |
| 1.2mm Aluminium | 33 | 5.3 | 0.75 | 1.21 | 368 | 1545 | ||
| M5 | 1.1mm Steel | 53 | 19.8 | 2.25 | 4.36 | 994 | 3753 | 5.5mm |
| 1.2mm Aluminium | 33 | 11.4 | 1.11 | 2.21 | 532 | 1846 |
The above data is based on average values obtained in a test environment. Variations in hole size, panel material and installation will effect performance. It is recommended that you carry out your own performance tests in the actual application. Contact our sales department who will be happy to supply samples free of charge.
