Blind End Insert for Mould-In Applications
This blind ended insert has been specifically designed for mould-in applications.
It utilises three opposed helical knurled bands and three deep recesses to achieve extremely high levels of pull-out and torque-out resistance. Ingress of plastic during moulding is prevented by the closed end and the use of a mould pin and mating counter bore in the open end.
A mould pin must be used with this insert to facilitate accurate location and to prevent the ingress of material during the moulding process.
Ultrsonic Insert for Thermoplastics
Symmetrical Insert for Thermoplastics
Press-In Locking Insert for Thermoplastics
Press-In Insert for Thermoplastics
Insert for Amorphous Thermoplastics
Insert for Brittle Thermoset Materials
Expansion Insert for Hard Plastics
Blind End Insert for Mould-In Applications
Fastener & Application Testing
Design & Development of bespoke Fasteners
| Thread | D | L | T Min | C |
| M2 | 3.4 | 5.5 | 3.6 | 1.0 |
| M2.5 | 4.3 | 6.4 | 4.0 | 1.2 |
| M3 | 4.7 | 7.3 | 4.6 | 1.3 |
| M3.5 | 5.5 | 9.2 | 6.0 | 1.6 |
| M4 | 6.3 | 10.2 | 6.7 | 1.8 |
| M5 | 7.3 | 11.2 | 7.4 | 2.0 |
| M6 | 9.8 | 14.4 | 8.1 | 2.0 |
| M8 | 11.4 | 16.5 | 11.1 | 2.3 |
| M10 | 13.8 | 17.9 | 11.9 | 2.4 |
| Materials | Part Number Examples |
Brass (B) |
Type | Thread | Material i.e. : FTI-M3-B (Blind End Insert-M3-Brass) |
