All of our products are manufactured for reliability and consistently high quality and are RoHS compliant as standard.
Our bright zinc based platings are all high quality trivalent clear chromate based finishes.
Broaching Studs
Performance Data
Broaching Nuts Performance Data
Broaching Studs Performance Data
Broaching Standoffs Performance Data
Broaching Panel Fasteners Performance Data
Our range of Self Clinching fasteners may also be of interest. Click here for further details.
Broaching Fastener Installation Guides
Broaching Fastener Performance Data
Fastener & Application Testing
Design & Development of bespoke Fasteners
Fastener |
Thread Size |
Max. Nut Tightening Torque (Nm) |
Test Panel | Installation (kN) |
Pushout (N) |
Torque Out (Nm) |
CBFH |
M3 | 0.45 | 1.5mm Printed Circuit Board | 1.8 | 285 | 0.79 |
| M4 | 1.6 | 1.5mm Printed Circuit Board | 1.8 | 355 | 1.8 | |
| M5 | 2.1 | 1.5mm Printed Circuit Board | 1.8 | 400 | 1.92 |
The above data is based on average values obtained in a test environment. Variations in hole size, panel material and installation will effect performance. It is recommended that you carry out your own performance tests in the actual application. Contact our sales department who will be happy to supply samples free of charge.
Above values were obtained in panels with drilled holes, you can expect a 15% reduction in performance when installing into punched holes.